This implements the orphaned editor fix for WebKit. Webkit wasn't
crashing before, but this causes webkit to show the same warning
webengine does if the editor is orhpaned (rather than silently
continuing). This allows the same BDD test to pass for both webkit and
webengine.
Instead of rewiring signals on tab.shutting_down, have the webelem check
if its parent tab is deleted, and throw a specific exception.
This is only necessary in WebEngine, Webkit does not crash when the
editor is orphaned.
I tried to write a test for is_deleted, but could not get it to pass:
```
def test_is_deleted(qtbot, view, config_stub, tab_registry, mode_manager):
tab_w = Tab(win_id=0, mode_manager=mode_manager)
qtbot.add_widget(tab_w)
tab_w._set_widget(view)
assert not tab_w.is_deleted()
sip.delete(view)
#assert tab_w.is_deleted()
```
The qtbot post-test cleanup would error due to the deleted view.
This reverts commit e72e8b8556.
Now that the SQL category works in isolation, it is possible to hide
quickmarks/bookmarks when those categories are empty.
Fixes#960
While QSortFilterProxyModel emits layoutChanged when changing the
pattern, QSqlQueryModel emits modelReset. As only layoutChanged was
connected, a HistoryCategory would only work in a model that also had at
least one ListCategory.
The simplest solution is to have the parent model emit the signal
directly. This also emits a single signal on a pattern change rather
that one for each child model.
Resolves#3016.
The signal we were using to inject greasemonkey scripts registered to
run at document-start (javaScriptWindowObjectCleared) was unreliable to
non-existant. The initialLayoutCompleted signal is a bit of an odd duck
too I suppose. Anyway, we don't anticipate any scripts would break from
being injected when the page is finished loaded that wouldn't already
have been flaky due to the complexities of the modern web. If there is
an issue hopefully someone raises an issue and we can look into it.
We weren't actually picking up the @noframes greasemonkey directive
because of this. I haven't tested this very extensively but it seems to
work for making the property value optional.
Use the `QWebPage.frameCreated` signal to get notifications of subframes
and connect the javascript injection triggering signals on those frames
too.
I had to add a `url = url() or requestedUrl()` bit in there because the
inject_userjs method was getting called to early or something when
frame.url() wasn't set or was set to the previous page so we were
passing the wrong url to greasemonkey.scripts_for().
I ran into a bizarre (I maybe it is completely obvious and I just don't
see it) issue where the signals attached to the main frame that were
connected to a partial function with the main frame as an argument were
not getting emitted, or at least those partial functions were not being
called. I worked around it by using None to mean defaulting to the main
frame in a couple of places.
Thanks to @sandrosc. A few breaking changes fixed (default method to
GM_xhr not working, GM_listvalues not cleaning up output, GM_setvalue
param checking logic wrong) and a few hygenic changes made.
Add qute version to GM_info object in GM wrapper.
Support using the greasemonkey @namespace metadata for its intended
purpose of avoiding name collisions.
Get a nice utf8 encoded string from a QUrl more better.
QTWebEngine 5.8 added support for parsing greasemonkey metadata blocks
and scripts added to the QWebEngineScriptCollection of a page or its
profile and then deciding what urls to run those scripts on and at what
point in the load process to run them. For earlier versions we must do
that work ourselves. But with the additional handicap of the less rich
qtwebengine api.
We have acceptNavigationRequest, loadStarted, loadProgress,
loadFinished, urlChanged to choose from regarding points at which to
register scripts for the current page.
Adding scripts on acceptNavigation loadStarted and loadFinished causes
scripts to run too early or too late (eg on the pages being navigated
from/to) and not run on the desired page at the time they are inserted.
We could maybe do some more sophisticated stuff with loadProgress but it
didn't have any better behaviour in the brief testing I gave it.
Registering scripts on the urlChanged event seems to work fine. Even if
it seems like there could be problems with the signal firing too often,
due to not necessarily being tied to the page load progress, that
doesn't seem to have an effect in practice. The event is fired when, for
example, the url fragment changes and even if we add a new script to the
collection (or remove an existing one) it doesn't have an effect on what
is running on the page.
I suspect all of those timing issues is due to the signals being
forwarded fairly directly from the underlying chomium/blink code but the
webengine script stuff only being pushed back to the implementation on
certain events.
Anyway, using urlChanged seems to work fine due to some quirk(s) of the
implementation. That might change with later development but this
codepath is only ever going to be used for version 5.7.
There are other potential optimizations like not removing and then
re-adding scripts for the current page. But they probably wouldn't do
anything anyway, or at least anything that you would expect.
This change requires urls specified in @include, @exclude and @matches
directives in metadata blocks to be in the same form that
QUrl.toEncoded() returns. That is a punycoded domain and percent encoded
path and query. This seems to be what Tampermonkey on chrome expects to.
Also changes the scripts_for() function to take a QUrl arg so the caller
doesn't need to worry about encodings.
This regex was broken since the original PR and subsequent code seemed to be
working around it. Before re.split was returning [everything up to
/UserScript, everything else], now it returns [before UserScript, metadata,
after /UserScript], which is good.
Also I added the check for the UserScript line starting at column 0 as per
spec.
These argument type restrictions are mentioned on the greasespot pages for
these value storage functions. We could call JSON.dumps() instead but better
to push that onto the caller so we don't have to try handle deserialization.
Also removes the check for localstorage because everyone has supported that
for years.
WebEngine only. Previously we were just removing every script from the
main world. But some other scripts might got here in the future so new
we are overriding the name field to add a GM- prefix so hopefully we
only remove greasemonkey scripts before adding new ones.
For qtwebengine 5.8+ only. This is because as of 5.8 some greasemonkey
script support is in upstream. That is, qtwebenginescript(collection)
parses the greasemonkey metadata block and uses @include/match/exclude
to decide what sites to inject a script onto and @run-at to decide when
to inject it, which saves us the trouble. Notes on doing this in <5.8
are below.
Scripts are currently injected into the main "world", that is the same
world as the javascript from the page. This is good because it means
userscripts can modify more stuff on the page but it would be nice if we
could have more isolation without sacrificing functionality. I'm still
looking into why my more feature-full scripts are not having any effect
on the page while running in a separate world.
Userscripts are added to both the default and private profile because I
that if people have scripts installed they want them to run in private mode
too.
We are grabbing the scripts from the greasemonkey module, as opposed to
reading them directly from disk, because the module adds some GM_* functions
that the scripts may expect, and because that is used for webkit anyway.
I have code to support qtwebengine <5.8 but didn't because I am not
happy with the timing of some of the signals that we are provided
regarding page load state, and the actual load state. While the
difference between document-end and document-idle isn't so bad,
injecting document-start scripts when a urlChanged event is emitted
results in the script being injected into the environment for the page
being navigated away from. Anyway, if anyone wants this for earlier
webengines I can oblige them.
Supposed to be after all the assets have finished loading and in page js
has run. Not that we can garuntee that last bit. If a script misbehaves
because a precondition isn't yet met I suggest adding a defer method to
the script that adds a timer until the precondition is met.
Also changed the map/filter calls to use list comprehensions to keep
pylint happy. Even if it does look uglier.
WebKit backend only for now. Loads all .js files from a directory,
specified in the greasemonkey-directory key in the storage section,
defaulting to data/greasemonkey, and wraps them in a minimal environment
providing some GM_* functions. Makes those scripts available via the
"greasemonkey" registered object in objreg and injects scripts at appropriate
times in a page load base on @run-at directives.
I can't reproduce this, but someone on KDE reported always getting a crash (as
msg.splitlines()[0] gives an IndexError) when trying to select a file with
Qt 5.9.3.
If an editor is open on a form in a tab and that tab is closed, rewire
the callback to print a warning. Previously, the callback would access a
deleted C++ object and cause a crash.
Resolves#2758.
Updated requirements and adjusted the configuration in `.flake8`; other
files have been modified where the lack of per-file auto-ignore caused
problems, where putty's `# flake8: disable=` syntax could be replaced
with a simpler `noqa`, or where pylint directives already suppressed the
same error.
Show an error message if the user edits the command such that it is
missing a start character (:, /, or ?). Previously, this would cause the
browser to crash.
Resolves#3326.
While 64-bit values are allowed with QtWebKit/QNetworkDiskCache, QtWebEngine
only allows 32-bit values here. With the updated sip's strict overflow checking,
that means we get an exception when setting a too big value.
:edit-command opens the current command line in an editor, and updates
the command line if the editor exits successfully. If --run is passed,
the command is executed when the editor exits sucessfully.
Resolves#2453.
If there are no quickmarks/bookmarks, hide the entire category in url
completion. Note that this only hides the category if
quickmarks/bookmarks is empty to begin with. An empty category is still
shown if the completion pattern filters out all items in that category.
See #960.
This changes the undo stack from a list of UndoEntry objects to a list
of lists of UndoEntry objects, so groups of tabs can be added. Only
:tab-only does that, but it's exposed by TabbedBrowser.close_tab as a
keyword argument.
With subprocess.run, we wait until the subprocess has completed, which means the
parent process will hang on :restart.
Since we *don't* want to wait for the subprocess here, using subprocess.Popen
seems the right thing to do.
This was introduced in bb54a954fe / #3203
Probably doesn't affect #3210 and #3220.
By default, ctrl+c will yank the selection from the completion menu onto
the clipboard, and ctrl+shift+c will yank it onto the primary selection.
Unfortunately ctrl+y was already taken by rl-yank (which,
counter-intuitively to vim users, will paste the last deleted text).
When doing :unbind with a default keybinding the first time, it gets inserted
into bindings.commands with None as value.
When then doing :unbind a second time, instead of just leaving that None value
as-is, we removed it again (because it got treated as a custom binding).
Fixes#3162
This reverts commit acfb3aa26f.
The related code doesn't really belong in webenginesettings.py after all, and
for some reason I don't understand right now this breaks tests in
javascript.feature because window._qutebrowser is undefined when running them.
* Keep descriptions concise.
* Prefer starting descriptions with a noun.
* Don't explain that placeholders are placeholders/get replaced.
* Introduce placeholder list by the following line:
'The following placeholders are defined:'
* List placeholders in a markdown-style list:
'* `{<placeholder>}`: <description>.'
* for selections, use appropriate determiner/pro-adverb/pronoun:
* 'When to [...].'
* 'How to [...].'
* 'Which [...] to [...].'
* 'What [...] to [...].'
* available placeholders are defined for tabs.title.format
* tabs.title.format_pinned refers to that definition
* window.title.format repeats the identical(!) definition
* this replaces the repetion by another reference
I previously removed the sorting logic from SortFilter thinking it was
unnecessary if we construct the model with a sorted list. However, this
only worked when no pattern was set, and the items are misordered as
soon as a pattern is input.
This patch reintroduces alpha-sorting, which can be disabled by passing
sort=False to the ListCategory constructor. The session completion test
had to be tweaked as it simulated the incorrect assumption that the
session list is not alpha-ordered; sessions come out of the
session-manager pre-sorted so we may as well use alpha-sorting in the
session completion model.
Resolves#3156.
