Remove the class variables _cursor_part and _empty_item_index. Instead,
split up the commandline around the cursor whenever that information is
needed. Using locals instead of class variables makes the logic easier
to follow and ends up requiring much less code.
Remove the dependency on the class variables _empty_item_index
and _cursor_part to make the code easier to follow. If
_update_completion is refactored in a similar way these variables can
be removed.
Turns out re.escape also escapes spaces, so we'd need to replace '(\\ )'
groups after escaping. At this point it's easier to just combine spaces
before escaping the pattern.
Fixes#1934.
Supersedes #1935.
Implement `completion-item-focus next-category` and
`completion-item-focus prev-category` to jump through completions by
category rather than by item.
Resolves#1567.
Command completions for `:bind` and `:` will now show bindings for
aliases. The binding is only included if it is bound to that alias, not
if it is bound to the command the alias points to.
Returning a defaultdict made the caller's code look confusing, as it
wasn't clear why there wouldn't be a Keyerror in some cases. Instead,
let the caller explicitly use `get`.
Consolidate the logic used to generate the command completion category
into one place. This is shared by CommandCompletionModel,
HelpCompletionModel, and BindCompletionModel.
Hidden commands are not shown in command completion as they typically
would not be run directly. However, a user might still might like to see
help for them if, for example, they are writing a script or creating a
binding.
Addresses #1707.
Wire up the config change event to update command completion on
changing aliases, so the new aliases will be included.
Fixes#1814.
Currently we do not have tests at a high enough level to test whether
signals are wired up correctly to update completions.
Completion.empty existed to fill a slot in the old Command.completions
interface if the first positional arg had no completions but the second
did, as is the case for the `bind` command. Now that
`Command.completions` is replaced by `Command.get_pos_arg_info`, this
is no longer needed.
Command completion types are now identified by ArgInfo, so just use
that directly and cut out the middle-man. This shouldn't change any
completion behavior.
Adds a test for get_pos_arg_info to test_cmdutils.
Modifies test_completer to test the use of get_pos_arg_info. Instead of
using FakeCommand, real Command objects are used, to validate that the
Completer works with the real Command interface. This also cleans out
some test cases that were testing things already covered by other cases.
first_item and last_item return an invalid index when there are no
items in the completion, and the completionwidget will throw on an
invalid index. However, setting an invalid index on the selection view
is fine, so just remove the assertion.
Resolves#1731.
These commands are more closely tied to the CompletionView than
Completer. This removes the need for an extra signal tying the
CompletionView to the Completer.
The call to _open_completion_if_needed was moved to
on_selection_changed, as this will already be called when a new item is
selected.
Rather than having a CompletionView instantiate and register a
Completer, instantiate both in MainWindow. The CompletionView is the
parent of the Completer, and communicates by emitting
selection_changed, meaning it no longer needs to contain a reference to
the Completer.
- clean up docstring typos
- use _ to name an unused loop variable
- parent the filter model to avoid an issue with disposal
- use mocker.patch instead of monkeypatch to mock Completer creation
- use is instead of == to compare by identity
It was implemented as a member of the Completer object, but registered
to the CompletionWidget. This led to the weird scenario where self was
actually a CompletionWidget, even though it was declared in Completer.
When a redirect occurs, the item is saved in history with a -r suffix
now. When opening qutebrowser that's picked up and the item is hidden
from completion.
The check `key.startswith('<') and key.endswith('>') is repeated many
times in code to check for a special key. Replace all these with a call
to the same function.
When showing the currently bound key in the misc column for command
completion, if the command has multiple bindings, show special bindings
(e.g. <ctrl-a>) after non-special bindings.
- Add a space after the comman for multiple binding suggestions.
- Use defaultdict(list) instead of defaultdict(lambda: [])
- Move the pylint comment back to the top of the class
Adds a title to the HistoryEntry class and includes it in the serialization
stuff. Not currently set from anywhere.
Not sure if anything more needs to be done to support non-ascii characters.
Everything works fine for me with unicode chars in url and title but
everything in my stack is utf-8.
The CompletionItemDelegate gets reused by Qt for various items in the
completion. Every time _get_textdoc() was called we created a new
QTextDocument, but since it has a long-living parent set (the delegate)
the old one was never actually garbage collected.
We now explicitly delete the old QTextDocument as it's not needed
anymore by either Qt or Python.
See #1476.
All commands will be offered as completions for the <command> argument
of :bind.
Due to the way completers parse the command line, the following
bind --mode caret j
will throw off completions as 'caret' is treated as a positional arg in
terms of the argument count for completions.
In the above example, completion will be triggered for 'j' and no
completions will be given for the actual command.
bind --mode=caret j will complete correctly, though completions are not
filtered by the given mode.
I attempted an approach to filter the commands based on the mode but it
ended up being messy and flaky.
This worked fine with Python 3.5 but causes a circular import which is
hard to break with Python 3.4.
The original solution was to do @pyqtSlot(object), but that doesn't work
with PyQt 5.6 anymore...
Allows to use ctrl+d to close tabs from the buffer completion widget
when they are selected. Respects current tab settings like whether you
can close the last tab in a window.
Had to change the `rebuild()` method to use `setData()` when possible
because the selection was being lost if the whole model was being rebuilt.
Current problems are:
1) When opening a new window while you already the tab completion open on
one window a category is added for the new window but new rows in
that category aren't picked up. Interesting if you open a third
window then close the second window the completion display is now
correct... I can see that the model is being updated correctly but I
am not sure why that isn't propagating to the view. Not sure whether
it is worth looking into (further) either.
2) Bit of duplication of code, it iterates over the window registry
twice. Could put everything in one loop but then that would be
dependant on the current behaviour of the `tab_closed` signal being
called with the relevant `tabbed_browser` still existing but with the
`shutting_down` flag set.
3) I'm still using just the one `rebuild()` method and removing items from
the end then calling `setData` on everything rather than having special
`on_tab/window_closed` methods (or partial functions) that delete the
actual corresponding item. Because if I did that I would also have to
special case tab moves etc.
`buffer` takes either a tab index or a string and focuses the specified
tab. The index can be of the form [0-9]+ which will switch to the
relevant tab in the current window or [0-9]+/[0-9]+ (that is
win_id/index) which will focus the specified window before switching
tabs. If a string is passed the list of open tabs across all windows is
sorted based on title and url (just like in the completion widget) and
the top result is selected.
WebHistory now has a clear() method which is also a command
(history-clear) which clears the qutebrowser history using the new
lineparser clear() method and emits a cleared signal.
The completion model urlmodel connects to the WebHistory.cleared signal
and clears its history category completion list.
I am adding this as a temporary fix before #58 or #1051 get implemented.
Fixes#919.
There were two issues here:
- CompletionWidget didn't delete the old model when setting a new one. This
means filterAcceptsRow was called for models which aren't even used anymore.
- setChild was used instead of appendRow for the BaseCompletionModel, which
caused Qt to call filterAcceptsRow once for every item of the completion
model instead of only once.
Having a light Qt theme but a dark qutebrowser theme, one can see an
ugly white border around the completion widget which is some relict from
the underlying Qt widget QTreeView. As qutebrowser has its own theming
settings for the mainwindow, it should hide the Qt theme as far as
possible.
If :completion-item-del was invoked with no item selected (e.g. directly after
pressing 'o'), there was a crash because the currentIndex was invalid.
/cc @antoyo (but I believe one of my changes on top of yours caused this)
Before, the completion was shrinked every time any item was removed/added to
the completion (rowsRemoved/rowsInserted signals), which was >3000 times when
completing history.
Also, the signals got connected multiple times if setting the same model, which
made the situation worse.
Fixes#734.
- split() now returns a ParseResult namedtuple with (cmd, args, cmdline)
arguments instead of only returning cmdline and setting self._cmd/self._args.
- Handling of split commands (;;) is now done in a separate parse_all()
function instead of run() to make testing easier.
See #615.
Before, the first item was unconditionally selected when none was selected
before. With :completion-item-prev (e.g. Shift-Tab), it makes more sense to
select the *last* one.
Before we limited the history items we could simply call WebHistory's
historyContains before iterating through all items in the history completion.
Now however it's possible an item is in the real WebHistory, but not actually
in the completion - so we always have to check the whole completion.
Before, the item_added signal was emitted *after* an item was added, which
means the on_history_item_added slot always assumed the item already is in the
history.
